220V Single Phase 2HP 1.5KW Frequency Inverter Drive single phase variable frequency drive

KD100 Vector Variable Frequency Inverter AC Drive

220V 2.2KW 4KW Three Input Three Output Variable Frequency Inverters

Key Advantage

1, With inside EMC filter and building-block design for IO extension card and different kinds of PG card
2, Top performance in our industry which represent in torque in less than 1hz 0.5hz 0.25hz 0.1hz and 0hz that it can compare with any domestic chinese brand for output torque
3, Smooth running and stability
4, Low noise on motor and fast response for 0.1S acceleration and deceleration without dead zone
5, Reverse and forward free switching
6, Sleeping function and energy saving function as well as in built PLC programming
7, Tension control and torque mode control
8, Support two group motor parameters which can realize two motor switching control

Advantages

Thanks to sophisticated engineers, scientific producing workmanship, rigorous quality control systems and management team, K-Drive frequency inverters are equipped with advanced features, some of which are listed as below:

01. Starting torque: 180% at 0.5Hz (V/f pattern, SVC pattern);

02. Speed adjustable range: 1: 100 (V/f pattern, SVC pattern);

03. Speed accuracy: +/-0.5% (V/f pattern), +/-0.2% (SVC pattern);

04. Over load capability: 150% 1minute, 180% 10seconds;

05. Abundant frequency command sources;

06. Diverse input and output terminals;

07. Ambient temperature: -10°C~50°C;

08. High precise torque constraint, process PID control, multi-speed control, contracting brake control, field weakening control, all sides protection, etc;

09. Online and offline auto-tuning of motor parameters can both performed;

10. Extremely short-time acceleration can be performed without any trip, such as 0.1s or 0s from 0Hz to 50Hz;

Mains Supply (L1/L,L2,L3/N)
Supply voltage	208-240V±10% 380-480V±10%
Power source frequency	50/60Hz±5%
Displacement power factor (cos φ)	(> 0.98)

Output Data (U, V, W)
Output voltage / frequency	0-100% of supply voltage / 0.00-600.00 Hz or customized
Ramp time	0.01-60000 S

Note:150% current can be provided for 1 minute, 180% for 10 seconds. Higher overload rating is achieved by oversizing the drive.

Digital Input
Programmable digital inputs	5
Logic	NPN or PNP
Voltage level	22 - 26V
Analog Input
Analog inputs	2
Modes	Voltage or current
Level	0 to +10V, 0/4 to 20 mA (scalable)
Automatic correction	YES
Relay Output
Programmable relay outputs	1
RA - RB / TA - TB	Normally close
RA - RC / TA - TC	Normally open
Contact capacitance	250VAC/3A, 30VDC/3A
Terminal 485 Interface
485+ / 485-	Rate: 4800/9600/19200/38400/57600/115200 bps Max. distance: 500m
GND	Isolated from COM
Ambient
Vibration	Less than 5.9 m/s² (0.6g)
Humidity	Relative humidity 5% - 95 %. No condensation
Corrosive environment	3C3
Ambient temperature	-10 ºC - 50 ºC
Altitude	0 - 2,000 m
	Rated output current derated 1% every 100 m above 1,000 m
Storage temperature	-40 - +70 ºC
Efficiency	Efficiency At rated amps: ≥93%
IP grade	IP20
Cooling method	Forced air cooling
Fieldbus Communication
Modbus RTU, Modbus ASCII	Built-in

Applications

KD100 drives are economical series at K-Drive. They offer V/f control, including voltage and frequency separated control, adaptable to various industrial applications if sensor-less vector control is not required, including printing machines, packaging machines, pumps, fans and blowers, etc.

Conveyors	Centrifuges	Food processing Machinery
Pumps	Fans	More …

Why choose K-Drive variable frequency drive?

In the trend of advocating smart and simple industrial automation, environmentally friendly products, value-added solutions, K-Drive, as one of the world's leading drive manufacturers aggressively investing in R&D, production, and continuous quality improvement, is well positioned to provide its customers with technology-driven, performance-outstanding products such as VFDs, wind power converters, servo drives, HEV/EV drives, helping its customers save energy and increase industrial productivity with sustainability on the one hand, and enhancing their entire value-chain quality, delivery, and services on the other hand.

Production

In production, rigorous quality control is implemented on components, circuit boards, and the finished goods, assuring products without defects.

K-Drive VS Other brands

Performance	Common brands	K-Drive
Applicable motors	Asynchronous motors	Asynchronous /synchronous motors
Starting torque	2.0Hz, 150% (sensor-less vector control) 0Hz, 180% (closed-loop vector control)	0.5Hz, 180% (sensor-less vector control) 0Hz, 200% (closed-loop vector control)
Speed adjustable range	1:100 (SVC), 1:1000 (VC)	1:200 (SVC), 1:1000 (VC)
Ambient temperature (no derating required)	-10-40ºC	-10-50ºC (for most of the models)
Rated input voltage	208VAC-400VAC	208VAC-480VAC
Communication	Modbus RTU//ASCII	Modbus RTU//ASCII Profibus-DP, CANopen, etc.
Position control (fixed length, or angular positioning)	×	√
Field weakening control	×	√
Autotune online	Online	Online & Offline
Short-time ramp-up	Trip	No trip
Customized features (software and/or hardware)	Unprocurable or no experience	Procurable with rich experience

Packaging and logistics

All drives are well packed before shipment, fit for air shipment, sea transportation, and express delivery. Customers are able to call its own nominated forwarder or consult K-Drive logistics department for worldwide shipment services.

* Low-power inverters are packed in cardboard box, and others are in plywood cases.

* Plenty of transportation procurable globally in accordance with customer demand or K-Drive expertise.

K-Drive AC motor drives are able to replace AC drives and inverters of the following brands: , LS, Toshiba, Siemens, Lenze, Yaskawa, Mitsubishi, Delta, Hitachi, WEG and etc；

Please leave us an inquiry for more details of our frequency inverters, like information of the model numbers, technical data, applicable application, pricing, distributor policy, lead time and/or customized functionality.

How to choose variable valtage variable frequency ?

Variable voltage variable frequency (VVVF) drives, also known as variable frequency drives (VFDs), are used to control the speed of electric motors. Choosing the right VVVF drive for your application requires consideration of several factors. Here are some things to keep in mind:

1. Motor type and power rating: VVVF drives are designed for specific types of motors and power ratings. Make sure that the VVVF drive you choose is compatible with the motor you intend to use and can handle the required power.

2. Load requirements: Consider the load requirements of your application. If the load is variable, a VVVF drive may be a good choice since it can adjust the motor speed to match the load.

3. Control features: Look for a VVVF drive that offers the control features you need. For example, you may want to be able to program acceleration and deceleration rates, or have the ability to adjust the speed remotely.

4. Environmental factors: Consider the environment in which the VVVF drive will be used. If the drive will be exposed to dust, moisture, or extreme temperatures, you may need a drive with special features to protect against these conditions.

5. Manufacturer reputation: Choose a VVVF drive from a reputable manufacturer with a proven track record of quality and reliability. This will help ensure that you get a drive that performs well and lasts a long time.

6. Cost: Finally, consider the cost of the VVVF drive. While you want to choose a drive that meets your needs, you also want to make sure it fits within your budget.

By considering these factors, you can choose a VVVF drive that is well-suited to your application and will provide reliable performance over the long term.

Who We Are

Shenzhen K-Easy Automation Co.,Limited. a Professional AC drive, Frequency Inverter, VFD, enterprise which has been specializing in Researching, Manufacturing and Trading high, medium and low voltage frequency inverter, providing our clients with integrated system solutions. We have professional R&D and devoted management team with more than 20 years’ experience of theoretical research, product development and quality management. We adopt SPWM, sensorless vector control and vector and torque control technology in our VFD series inverters, which has reached the international advanced standard. The products can directly replace or to be equivalent of Europe and the United States, Japan and other brands, providing customers with a powerful technical support.

We have achieved popularity and qualification in VFD industry. Quality is the life of enterprise.

We have built up a comprehensive product family. Frequency inverters' power covers the range from 0.4 to 630kW, and voltage range is between 220V and 480V. More than inverters are running smoothly 300, 000 units at different industrial sites.

We believe “quality is life ”,so we will test all products before shipment,All Module of our VFD will be used quality is life with Infenion only, With years of persistence, the total failure ratio of Our frequency inverters has been controlled below 1%. We never lose a customer because of the quality problem;

With Strong R&D and Engineer Team, makes our after-service very easy, For all doubts and requesting for technologies supporting, We can offer detailed Solution without delay, so for us,“Not Only Products, But also solutions”;

Join us, enjoy the business.